T40WE - IR-detektor - 40m * 3,2m (Long range)
PIR-40AM är en "high performance" passiv infrarød detektor laget for installasjon innendørs og utendørs med IP 55.
Den unike kombinasjonen av tre speil og tre stråler, muliggjør 4 forskjellige programmer. De forskjellige programmene er tilpasset for å montere enheten lavt eller høyt på veggen 2 til 6 meter. PIR-40AM har en langdistanse linse som når hele 40 * 3,2 meter og kan installeres i høyder 2-6 meter. Enheten har også antimask (maskebeskyttelse)
funksjoner
4 programmer: Lav stilling, høy posisjon, Pet-mode, høy tetthet.
Lang rekkevidde med rekkevidde opptil 40 meter.
2 til 6 meter installasjonshøyde (Avhengig av hvilken innstilling du velger)
Optisk deteksjon med høy ytelse med 3 speil
Installasjons LED for å kunne estimere avstand når du installerer
Laget for innendørs og utendørs bruk (IP55 klasset)
Finnes i hvitt.
NB! Bestillingsvare med 1-2 ukers leveringstid.
Data:
Model; PIR-T40NAM
Detection system: Passive Infrared
Detection area: Vertical curtain detection
Detection distance: Max. 150' (45m), 46 rays (23 pairs)
Power supply: 9 to 28VDC (non polarity)
Current consumption: Max. 50mA
Alarm output Contact method: Dry semi-conductor contact, N.C./N.O. selectable
Contact operation: One-shot operation when detecting intrusion
Contact rating: 24V (AC/DC) 0.25A (resistive load)
External output
Contact method: Dry semi-conductor contact, N.O.
Contact operation: One-shot operation/Off delay operation selectable when detecting intrusion
Contact rating: 24V (AC/DC) 0.25A (resistive load)
Tamper output
Contact method: Dry mechanical contact, N.C.
Contact operation: Continuous output
Contact rating: 24V (AC/DC) 0.1A (resistive load)
Anti-masking output
Contact method: Dry semi-conductor contact, N.C.
Contact operation: continuously output when an object is placed in front of the lens (until normal recovery)
Contact rating: 24V (AC/DC) 0.25A (resistive load)
Alarm LED Red LED: Blinks during warm up
Lights at alarm
Memory LED Red LED: Blinks for 3 minutes during memory display
Functions Sensitivity selection, Operation mode selection, Alarm memory LED, Self diagnosis, Low voltage monitoring, Temperature compensation, Tamper, LED area checker, Environmental adjustment ,Creep zone detection, Walk test mode, Near area cancellation, Anti-masking
Mounting positions • Low position mode: 6.6’ to 8.3’(2.0 to 2.5m)
• Middle position mode : 8.3’ to 11.5’(2.5 to 3.5m)
• High position mode : 11.5’ to 13’(3.5 to 4.0m)
• High-density mode : 6.6’ to 20’(2.0 to 6.0m)
Angle adjustment Horizontal direction: 90° (by 5°pitch)
Vertical direction: 17° (no stage adjustment)
Ambient temperature -25°C to +55°C (no condensation and freezing)
Installation place Indoor/outdoor wall surface
*Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP rating IP55
Connections: Terminals (M2.6 self up terminal)
Weight: Approx. 600g
Appearance: Body, Window: resin
PIR-40AM är en "high performance" passiv infrarød detektor laget for installasjon innendørs og utendørs med IP 55.
Den unike kombinasjonen av tre speil og tre stråler, muliggjør 4 forskjellige programmer. De forskjellige programmene er tilpasset for å montere enheten lavt eller høyt på veggen 2 til 6 meter. PIR-40AM har en langdistanse linse som når hele 40 * 3,2 meter og kan installeres i høyder 2-6 meter. Enheten har også antimask (maskebeskyttelse)
funksjoner
4 programmer: Lav stilling, høy posisjon, Pet-mode, høy tetthet.
Lang rekkevidde med rekkevidde opptil 40 meter.
2 til 6 meter installasjonshøyde (Avhengig av hvilken innstilling du velger)
Optisk deteksjon med høy ytelse med 3 speil
Installasjons LED for å kunne estimere avstand når du installerer
Laget for innendørs og utendørs bruk (IP55 klasset)
Finnes i hvitt.
NB! Bestillingsvare med 1-2 ukers leveringstid.
Data:
Model; PIR-T40NAM
Detection system: Passive Infrared
Detection area: Vertical curtain detection
Detection distance: Max. 150' (45m), 46 rays (23 pairs)
Power supply: 9 to 28VDC (non polarity)
Current consumption: Max. 50mA
Alarm output Contact method: Dry semi-conductor contact, N.C./N.O. selectable
Contact operation: One-shot operation when detecting intrusion
Contact rating: 24V (AC/DC) 0.25A (resistive load)
External output
Contact method: Dry semi-conductor contact, N.O.
Contact operation: One-shot operation/Off delay operation selectable when detecting intrusion
Contact rating: 24V (AC/DC) 0.25A (resistive load)
Tamper output
Contact method: Dry mechanical contact, N.C.
Contact operation: Continuous output
Contact rating: 24V (AC/DC) 0.1A (resistive load)
Anti-masking output
Contact method: Dry semi-conductor contact, N.C.
Contact operation: continuously output when an object is placed in front of the lens (until normal recovery)
Contact rating: 24V (AC/DC) 0.25A (resistive load)
Alarm LED Red LED: Blinks during warm up
Lights at alarm
Memory LED Red LED: Blinks for 3 minutes during memory display
Functions Sensitivity selection, Operation mode selection, Alarm memory LED, Self diagnosis, Low voltage monitoring, Temperature compensation, Tamper, LED area checker, Environmental adjustment ,Creep zone detection, Walk test mode, Near area cancellation, Anti-masking
Mounting positions • Low position mode: 6.6’ to 8.3’(2.0 to 2.5m)
• Middle position mode : 8.3’ to 11.5’(2.5 to 3.5m)
• High position mode : 11.5’ to 13’(3.5 to 4.0m)
• High-density mode : 6.6’ to 20’(2.0 to 6.0m)
Angle adjustment Horizontal direction: 90° (by 5°pitch)
Vertical direction: 17° (no stage adjustment)
Ambient temperature -25°C to +55°C (no condensation and freezing)
Installation place Indoor/outdoor wall surface
*Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP rating IP55
Connections: Terminals (M2.6 self up terminal)
Weight: Approx. 600g
Appearance: Body, Window: resin
Relaterte produkter
Ingen relaterte produkter finnes for dette produktet.
Produktvideo
Ingen produktvideoer
